-------------------------------------------------------------------
These topics can be coded in your Mini (from 2007, except R52).
as of 2016.06
**********************
Cornering Light
**********************
Cornering lights – front fog lights
• active
• not active
Front fog lights are used as cornering lights. Only works if ‘Cornering lights’ is also activated. (codable in FRM)
Cornering lights 2/3
• active
• not active
Only change this function with ‘Cornering lights 1/3′. (codable in FRM)
**********************
Turn signals
**********************
Hazard lights
• standard
• double
Hazard lights blink once or twice. (codable in FRM)
Crash lights
• standard
• double
Hazard lights blink once or twice upon an accident. (codable in FRM)
One-touch turn signal function
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. If available, please activate this option for the different keys as well. In some cases, this option also needs to be enabled in the iDrive. (codable in FRM)
One-touch turn signal function Key 1
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 1. (codable in FRM)
One-touch turn signal function Key 2
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 2. (codable in FRM)
One-touch turn signal function Key 3
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 3. (codable in FRM)
**********************
Brake lights
**********************
Brake force display 1/2
• active
• active (alternative)
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. To activate this function, set ‘Brake force display 2/2′ to ‘active’. (codable in FRM)
Brake force display 2/2
• active
• active (alternative)
• not active
Only change this function with ‘Brake force display 1/2′. (codable in FRM)
Brake force display – minimum speed
• 20 kph / 12 mph
• 50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – blinking speed
• slow
• fast
Blinking speed for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – angel eyes
• not active
• on
• flashing
Customization for angel eyes for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – outer brake lights
• not active
• on
• flashing
Customization for outer brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – inner brake lights
• on
• flashing
Customization for inner brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – third brake light
• not active
• on
• flashing
Customization for third brake lights (rear window) for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – tail lights
• not active
• on
• flashing
Customization for tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
Brake force display – rear fog lights
• not active
• on
• flashing
Customization for rear fog lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)
**********************
Locking
**********************
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Lock tailgate when car locked
• active
• not active
Tailgate cannot be unlocked, when car is locked. (codable in CAS)
Automatically lock vehicle Key 1
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 1
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 2
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 2
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 3
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 3
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 4
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 4
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)”
Lock vehicle upon ignition
• active
• not active
Vehicle is locked, when ignition is turned on. (codable in CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 6 kph / 4 mph
• 12 kph / 8 mph
• 18 kph / 11 mph
• 24 kph / 15 mph
• 30 kph / 19 mph
“Sets the speed at which the vehicle automatically locks all doors.
To activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)”
Lock vehicle at x kph Key 1
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in CAS)
Lock vehicle at x kph Key 2
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in CAS)
Lock vehicle at x kph Key 3
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in CAS)
Lock vehicle at x kph Key 4
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in CAS)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in FRM)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in FRM)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in FRM)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in FRM)
**********************
Angel Eyes
**********************
Angel eyes brightness daytime running lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (codable in FRM)
Angel eyes brightness standing lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for standing lights. (codable in FRM)
Angel eyes brightness parking lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for parking lights. (codable in FRM)
Brightness of Angel Eyes 1 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (codable in FRM)
Brightness of Angel Eyes 2 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)
Brightness of Angel Eyes 3 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)
**********************
Power Windows
**********************
Power windows after ignition off
• active
• not active
Power windows are active for another minute after ignition is turned off. (codable in CAS)
Continue window action when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in FRM)
**********************
High Beam
**********************
Front fog lights with high beams
• active
• not active
Front fog lights are automatically turned off when activating high beams. (codable in FRM)
**********************
Seatbelt Hand-over
**********************
Seatbelt Hand-Over driver
• active
• not active
Automatic seatbelt hand-over for driver is active/inactive. (codable in FRM)
Seatbelt Hand-Over passenger
• active
• not active
Automatic seatbelt hand-over for passenger is active/inactive. (codable in FRM)
**********************
Tail gate/Rear lid
**********************
Unlock rear window
• active
• not active
Key unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 1
• active
• not active
Key 1 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 2
• active
• not active
Key 2 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 3
• active
• not active
Key 3 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 4
• active
• not active
Key 4 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window via outside button
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window via outside button Key 1
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)
Unlock rear window via outside button Key 2
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)
Unlock rear window via outside button Key 3
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)
Unlock rear window via outside button Key 4
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)
Unlock rear window with footwell switch
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. (codable in CAS)
Open rear window via footwell switch Key 1
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)
Open rear window via footwell switch Key 2
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)
Open rear window via footwell switch Key 3
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)
Open rear window via footwell switch Key 4
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)
**********************
Coming Home
**********************
Activate follow me home lights
• active
• not active
Follow me home lights are active/not active. (codable in FRM)
Follow me home lights with remote
• active
• not active
Quickly press the ‘Open trunk’ button twice to activate the follow me home lights. In some circumstances the function ‘Panic mode remote’ in the CAS has to be activated, too. (codable in FRM)
Cancel follow me home lights
• active
• not active
Follow me home lights are cancelled, when activating the flasher again. (codable in FRM)
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flasher again. (codable in FRM)
Follow me home lights duration
• off
• 40s
• 90s
• 150s
• 240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flasher, while the enginge is off. (codable in FRM)
Follow me home lights duration Key 1
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 1. (codable in FRM)
Follow me home lights duration Key 2
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 2. (codable in FRM)
Follow me home lights duration Key 3
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 3. (codable in FRM)
**********************
Interior Lights
**********************
Interior lights with remote
• active
• not active
Pressing the lock button on the remote, when the car is already locked, turns on the interior lights. (codable in CAS)
Interior lighting off after 2 minutes
• active
• not active
Interior lighting is automatically turned off after two minutes. (codable in FRM)
Soft turn on/off for interior lighting
• active
• not active
Interior lighting is softly turned on and off. (codable in FRM)
**********************
Comfort Functions
**********************
Comfort start
• active
• not active
Ignition key just has to be tapped once to start the engine after ignition is turned on. (codable in CAS)
Comfort eject
• active
• not active
Turn off the ignition with a long press on the start/stop button in order to eject the ignition key. (codable in CAS)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. (codable in CAS)
Comfort folding for sideview mirrors
• active
• not active
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using remote’ and ‘Comfort close using remote’ in this module. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (codable in KOMBI)
Digital speedometer permanent
• active
• not active
Digital speedometer is displayed permanently in dashboard. (codable in KOMBI)
Digital speedometer correction
• true speed
• ‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
Correction’ analog speedometer
• true speed
• ‘corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. (codable in KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2′. (codable in KOMBI)
Gear shift indicator key 1
• active
• not active
Gear shift indicator for key 1. (codable in KOMBI)
Gear shift indicator key 2
• active
• not active
Gear shift indicator for key 2. (codable in KOMBI)
Gear shift indicator key 3
• active
• not active
Gear shift indicator for key 3. (codable in KOMBI)
Gear shift indicator key 4
• active
• not active
Gear shift indicator for key 4. (codable in KOMBI)
Cruise Control speed display
• 0s
• 4s
• 6s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)
Daytime running lights in OBC
• active
• not active
Turn daytime running lights on/off in on board computer. Might not work if an iDrive system is installed. (codable in KOMBI)
**********************
High Beam Flasher
**********************
Flasher with bi-xenon
• active
• not active
Bi-xenon lamps are used for flasher. (codable in FRM)
Front fog lights with flasher
• active
• not active
Front fog lights are automatically turned off when activating flasher. (codable in FRM)
**********************
Opening
**********************
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)
Easy entry
• active
• not active
Press the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 1
• active
• not active
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 2
• active
• not active
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 3
• active
• not active
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 4
• active
• not active
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 1
• active
• not active
“Separate setting for ‘Selective central locking’ for key 1
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 2
• active
• not active
“Separate setting for ‘Selective central locking’ for key 2
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 3
• active
• not active
“Separate setting for ‘Selective central locking’ for key 3
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 4
• active
• not active
“Separate setting for ‘Selective central locking’ for key 4
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking – unlock fuel lid
• active
• not active
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (codable in CAS)
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4′ is activated. (codable in CAS)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in FRM)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in FRM)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in FRM)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in FRM)
**********************
Cleaning
**********************
Wiping interval standstill
• 3s
• 5s
Interval in seconds for windscreen wipers at standstill. (codable in SPEG)
Wiping interval rear window
• not active
• 2s
• 4s
• 6s
• 8s
• 12s
Interval in seconds for windscreen rear window wipers. (codable in SPEG)
Rear wiper in reverse gear
• not active
• active
Rear wiper automatically turns on in reverse gear. (codable in SPEG)
Complete wiping cycle
• not active
• active
Wiping cycle is completed, when ignition is turned off. (codable in SPEG)
Wipe delay after windowscreen cleaning
• 0.1s
• 0.3s
• 0.5s
• 0.7s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in SPEG)
Wipe delay after rear window cleaning
• 0.1s
• 0.3s
• 0.5s
• 0.7s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in SPEG)
Number of wipes after windscreen cleaning
• 1
• 2
• 3
• 4
Number of wipes after windscreen is cleaned. (codable in SPEG)
Number of wipes after rear window cleaning
• 1
• 2
• 3
• 4
Number of wipes after rear window is cleaned. (codable in SPEG)
Head light cleaning
• not active
• active
Turn head light cleaning on/off. (codable in SPEG)
Number until headlight cleaning
• 3
• 5
• 7
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in SPEG)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (codable in SPEG)
Length of splash for head lights
• 0.5s
• 0.7s
• 1s
Length of a single splash for head light cleaning. (codable in SPEG)
Delay between splashes for head lights
• 1s
• 1.3s
• 1.5s
Delay between splashes for head light cleaning. (codable in SPEG)
**********************
Headlight Cleaning
**********************
Head light cleaning
• not active
• active
Turn head light cleaning on/off. (codable in SPEG)
Number until headlight cleaning
• 3
• 5
• 7
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in SPEG)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (codable in SPEG)
Length of splash for head lights
• 0.5s
• 0.7s
• 1s
Length of a single splash for head light cleaning. (codable in SPEG)
Delay between splashes for head lights
• 1s
• 1.3s
• 1.5s
Delay between splashes for head light cleaning. (codable in SPEG)
**********************
Sidemarker
**********************
Sidemarker (US)
• active
• not active
Sidemarkers are permanently active. May need additional ‘Sidemarker (US)’ functions set to ‘active’ if available. (codable in FRM)
Sidemarker (US) brightness
• off
• very low
• low
• rather low
• rather high
• high
• very high
Brightness for ‘Sidemarker (US)’. (codable in FRM)
**********************
Mirrors
**********************
Mirror tilt 1/2
• active
• not active
Requirement for mirror tilt functions. (codable in FRM)
Mirror tilt 2/2
• active
• not active
Requirement for mirror tilt functions. (codable in FRM)
Tilt mirror in reverse
• active
• not active
“This function requires an installed LIN-Bus (usually installed with mirror heating).
Passenger mirror is tilted when switching into reverse gear. To activate this function activate ‘Mirror tilt’, aswell. (codable in FRM)”
Comfort folding for sideview mirrors
• active
• not active
“This function requires an installed LIN-Bus (usually installed with mirror heating).
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in FRM)”
Electrochromatic mirror dimming
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating)nSide mirrors automatically dim electrochromatic. (codable in FRM)
**********************
Voltage Monitoring
**********************
Angel Eyes voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (codable in FRM)
Angel Eyes voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Sidemarker voltage monit. 1/2
• active
• not active
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in FRM)
Sidemarker voltage monit. 2/2
• active
• not active
Deactivate with ‘Sidemarker voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Turn signals front voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in FRM)
Turn signals front voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for fog lights. Might cause flickering of LED lights. (codable in FRM)
Fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Fog lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
High beams voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in FRM)
High beams voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Low beams voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in FRM)
Low beams voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Turn signals rear voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in FRM)
Turn signals rear voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Braking lights voltage monit. 1/2
• active
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in FRM)
Braking lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Braking lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Inner brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for inner brake light. Might cause flickering of LED lights. (codable in FRM)
Inner brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Inner brake light voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in FRM)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Tail lights voltage monit. 1/2
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in FRM)
Tail lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Tail lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Reversing lights voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in FRM)
Reversing lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in FRM)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Rear fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in FRM)
Rear fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in FRM)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in FRM)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2′ to disable flickering of LED lights. (codable in FRM)
**********************
Engine Start Stop
**********************
Start/Stop-Automatic memory
• not active
• active
Setting for Start/Start-Automatic is saved for the next start. (codable in SPEG)
**********************
Speedometer
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (codable in KOMBI)
Digital speedometer permanent
• active
• not active
Digital speedometer is displayed permanently in dashboard. (codable in KOMBI)
Digital speedometer correction
• true speed
• ‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
Correction’ analog speedometer
• true speed
• ‘corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
**********************
Daytime Running Lights
**********************
Daytime running lights 1/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 2/2′ as well. (codable in FRM)
Daytime running lights 2/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 1/2′ as well. (codable in FRM)
Daytime running lights – Key 1
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 1. (codable in FRM)
Daytime running lights – Key 2
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 2. (codable in FRM)
Daytime running lights – Key 3
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 3. (codable in FRM)
Daytime running lights – customization
• Off
• Low beams
• High beams
• Only additional lights (EU models)
• Only additional lights (US models)
Customization of the daytime running lights (DRL). The DRL is activated when the light switch is set to position ‘0’ in the car. (codable in FRM)
Daytime running lights – high beams brightness
• off
• low
• medium
• high
• very high
Brightness of high beams for daytime running lights. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. (codable in FRM)
Daytime running lights – upper front fog lights
• active
• not active
Use upper front fog lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – lower front fog lights
• active
• not active
Use lower front fog lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – front fog lights brightness
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness for ‘Daytime running lights – front fog lights’. (codable in FRM)
Daytime running lights – front turn signals
• active
• not active
Use front turn signals as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – sidemarker
• active
• not active
Use sidemarkers as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Angel eyes brightness daytime running lights
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (codable in FRM)
Daytime running lights – number plate lighting
• active
• not active
Use number plate lighting as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – upper brake lights
• active
• not active
Use upper brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – lower brake lights
• active
• not active
Use lower brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Daytime running lights – 3rd brake lights
• active
• not active
Use 3rd brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in FRM)
Brightness of Angel Eyes 1 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (codable in FRM)
Brightness of Angel Eyes 2 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)
Brightness of Angel Eyes 3 – alternative
• off
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)
**********************
Alarm System
**********************
Panic alarm with remote
• active
• not active
Press and hold the ‘unlock trunk’ button to trigger the alarm. To activate this function, also activate ‘Panic alarm’ in the DWA module. (codable in CAS)
Arm/Disarm Anti-Theft Alarm System
• Only with remote
• With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in CAS)
**********************
Welcome Light
**********************
Welcome lights
• active
• not active
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in FRM)
Welcome lights Key 1
• active
• not active
Separate setting for ‘Welcome lights’ for key 1. (codable in FRM)
Welcome lights Key 2
• active
• not active
Separate setting for ‘Welcome lights’ for key 2. (codable in FRM)
Welcome lights Key 3
• active
• not active
Separate setting for ‘Welcome lights’ for key 3. (codable in FRM)
Welcome lights Key 4
• active
• not active
Separate setting for ‘Welcome lights’ for key 4. (codable in FRM)
Welcome lights duration
• off
• 5s
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in FRM)
Welcome lights – low beams
• not active
• turn on softly
• turn on hard
Low beams are turned on with welcome lights. (codable in FRM)
Welcome lights – brake force display
• not active
• turn on softly
• turn on hard
Brake force display is turned on with welcome lights. (codable in FRM)
Welcome lights – braking lights
• not active
• turn on softly
• turn on hard
Braking lights are turned on with welcome lights. (codable in FRM)
Welcome lights – turn signals front
• not active
• turn on softly
• turn on hard
Turn signals front are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in FRM)
Welcome lights – turn signals rear
• not active
• turn on softly
• turn on hard
Turn signals rear are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in FRM)
Welcome lights – high beams
• not active
• turn on softly
• turn on hard
High beams are turned on with welcome lights. (codable in FRM)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
Number plate lights are turned on with welcome lights. (codable in FRM)
Welcome lights – front fog lights
• not active
• turn on softly
• turn on hard
Front fog lights are turned on with welcome lights. (codable in FRM)
Welcome lights – rear fog lights
• not active
• turn on softly
• turn on hard
Rear fog lights are turned on with welcome lights. (codable in FRM)
Welcome lights – corner LEDs
• not active
• turn on softly
• turn on hard
Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (codable in FRM)
Welcome lights – standing lights front
• not active
• turn on softly
• turn on hard
Standing lights front are turned on with welcome lights. (codable in FRM)
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on hard
Standing lights rear are turned on with welcome lights. (codable in FRM)
**********************
Warnings
**********************
Lights-on warning
• active
• not active
A warning is shown, when the driver’s door is opened while the lights are still on. (codable in FRM)
Angel Eyes/standing lights warning
• active
• not active
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (codable in FRM)
Turn signals front warning
• active
• not active
Warning for malfunction of front turn signals in the on board computer. (codable in FRM)
Fog lights front warning
• active
• not active
Warning for malfunction of front fog lights in the on board computer. (codable in FRM)
High beams warning
• active
• not active
Warning for malfunction of high beams in the on board computer. (codable in FRM)
Low beams warning
• active
• not active
Warning for malfunction of low beams in the on board computer. (codable in FRM)
Turn signals rear warning
• active
• not active
Warning for malfunction of rear turn signals in the on board computer. (codable in FRM)
Outer brake lights warning
• active
• not active
Warning for malfunction of outer braking lights in the on board computer. (codable in FRM)
Inner brake lights warning
• active
• not active
Warning for malfunction of inner braking lights in the on board computer. (codable in FRM)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (codable in FRM)
Tail lights warning
• active
• not active
Warning for malfunction of tail lights in the on board computer. (codable in FRM)
Reversing lights warning
• active
• not active
Warning for malfunction of reversing lights in the on board computer. (codable in FRM)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (codable in FRM)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (codable in FRM)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (codable in FRM)
Speed limit warning
• active
• not active
Speed limit warning at 120 kph is active/not active. (codable in KOMBI)
Ignition key warning
• active
• not active
Ignition key warning active/not active. (codable in KOMBI)
Threshold for low range warning
• off
• 20 km / 12 mi
• 50 km / 31 mi
Threshold for acoustic low range warning due to low fuel level. (codable in KOMBI)
Threshold for tank reserve warning
• 6.0 litres
• 8.0 litres
• 10.0 litres
Threshold for tank reserve warning due to low fuel level. (codable in KOMBI)
**********************
Ignition
**********************
Prohibit engine start without brake
• active
• not active
Engine can’t be started when brake is not pressed. (codable in CAS)
**********************
**********************
0 件のコメント:
コメントを投稿