某倉庫店にi8とi3が置いてありました。とてもとても魅力的なんだけど、i8は車庫に入らないだろうし、そもそも手が出ない。i3はちょっと車内がせまいかな。でも、そろそろHVやEVも考えたくなってきました。
2017年5月15日月曜日
2017年5月7日日曜日
丸亀のあさりバターうどん～6月まで延長になりました～
うどんを食べに日比谷までドライブがてら行ってきました。日祝限定の路駐できるところを探してあとは自転車で移動。
目的は今おいしいと話題の丸亀製麺所のあさりバターうどん。春のあさりうどんは期間限定で4月下旬で終わる予定だったのですが、評判が良くて一部の店限定ですが6月頃まで延長したそうです。
あふれるほど入っているあさりの出汁とバターの風味のバランスが絶品です。あさりは2回とも25個ほど入ってました。バターなしが標準ですが、風味がよくなるので、絶対入れた方がおススメ。ぜひキャンペーンが終わるまでに。
丸亀は近所にもいくつかお店があるのですが、あさりうどんはもう終わってしまったようで、ちょっと遠出して食べてきました。
川口上青木店(実は一昨日も....)
日比谷帝劇ビル店(GW2回目...)
目的は今おいしいと話題の丸亀製麺所のあさりバターうどん。春のあさりうどんは期間限定で4月下旬で終わる予定だったのですが、評判が良くて一部の店限定ですが6月頃まで延長したそうです。
あふれるほど入っているあさりの出汁とバターの風味のバランスが絶品です。あさりは2回とも25個ほど入ってました。バターなしが標準ですが、風味がよくなるので、絶対入れた方がおススメ。ぜひキャンペーンが終わるまでに。
丸亀は近所にもいくつかお店があるのですが、あさりうどんはもう終わってしまったようで、ちょっと遠出して食べてきました。
日比谷帝劇ビル店(GW2回目...)
2017年5月4日木曜日
Carly for BMW Coding Menu X1 (F48)
-------------------------------------------------------------------
**********************
Ambient lightning
**********************
Ambient lighting brightness 1/2
• same brightness as speedometer
• own brightness
Usually the brightness of the ambient lighting is automatically adjusted to the brightness of the speedometer illumination. To set the brightness indepently from the speedometer illumination, set this function to ‘own brightness’. The brightness of the ambient lighting can then be changed with ‘Ambient lighting brightness 2/2’. (codable in BDC)
Ambient lighting brightness 2/2
• very low
• low
• rather low
• medium
• rather high
• high
• very high
Own brightness for ambient lighting. In order to activate this function, set ‘Ambient lighting brightness’ to ‘own brightness’. (codable in BDC)
**********************
Cleaning
**********************
Threshold washer fluid warning
• low
• medium
• high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in BDC)
Number of wipes after windscreen cleaning
• 1
• 2
• 3
• 4
Number of wipes after windscreen is cleaned. (codable in BDC)
Number of wipes after rear window cleaning
• not active
• 1
• 2
• 3
• 4
Number of wipes after rear window is cleaned. (codable in BDC)
Wiping interval rear window
• not active
• 2s
• 4s
• 6s
• 8s
• 10s
• 12s
• 15 s
Interval in seconds for windscreen rear window wipers. (codable in BDC)
Reduce wiper speed
• not active
• 130 kph / 80 mph
• 170 kph / 105 mph
• 210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in BDC)
Rear window cleaning with low washer liquid
• active
• not active
Rear windows are also cleaned even though the washer fluid level is low. (codable in BDC)
Wipe delay after windowscreen cleaning
• 0.1 s
• 0.3 s
• 0.5 s
• 0.7 s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in BDC)
Wipe delay after rear window cleaning
• 0.1 s
• 0.3 s
• 0.5 s
• 0.7 s
• 0.9 s
• 1.1 s
• 1.3 s
• 1.5 s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in BDC)
Wiping interval standstill
• 3s
• 5s
Interval in seconds for windscreen wipers at standstill. (codable in BDC)
Windscreen wipers continue
• active
• not active
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in BDC)
Number until headlight cleaning
• 1
• 5
• 10
• 15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in BDC)
Continue rear wiper when igntion turned on
• active
• not active
Rear wiper continue wiping and don’t interrupt, when the ignition is turned on. (codable in BDC)
Rear wiper permanent when reversing
• active
• not active
When rear wipers are active while reversing, they are automatically set to permament wiping. (codable in BDC)
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (codable in BDC)
Maximum speed headlight cleaning
• 6 kph / 4 mph
• 12 kph / 8 mph
• 30 kph / 19 mph
• 50 kph / 31 mph
• 80 kph / 50 mph
• 130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in BDC)
Number of splashes for head lights
• 1
• 2
• 3
Number of splashes for cleaning the head lights. (codable in BDC)
Length of splash for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Length of a single splash for head light cleaning. (codable in BDC)
Delay between splashes for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Delay between splashes for head light cleaning. (codable in BDC)
Cleanings until 1st headlight cleaning
• not active
• 1
• 3
• 5
• 8
• 10
• 15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in BDC)
**********************
Clock/Date
**********************
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Date incl. Time in dashboard
• active
• not active
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)
**********************
Comfort Functions
**********************
Comfort open sunroof immediately
• active
• not active
Start opening the sunroof immediately during comfort opening. (codable in BDC)
Comfort close sunroof immediately
• active
• not active
Start closing the sunroof immediately during comfort closing. (codable in BDC)
Comfort open windows simultaneously
• active
• not active
Front and back windows open simultaneously during comfort opening. (codable in BDC)
Comfort close windows simultaneously
• active
• not active
Front and back windows close simultaneously during comfort closing. (codable in BDC)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in BDC)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in BDC)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in BDC)
Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in BDC)
**********************
Coming Home
**********************
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in BDC)
**********************
Daytime Running Lights
**********************
Daytime running lights – light switch
• not active
• A or 0
• A, 0 or 1
Positions for the light switch where the daytime running lights function is activated. (codable in BDC)
**********************
Door lights
**********************
Turn on door lights in reverse gear
• active
• not active
Turn on door lights while car is in reverse. This function can be used to illuminate the area while reversing in order to get a better view of the sides of the car. (codable in BDC)
**********************
Easy Entry
**********************
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)
**********************
Engine Start Stop
**********************
Start/Stop-Automatic memory
• active
• not active
Setting for Start/Stop-Automatic is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in BDC)
Start/Stop-Automatic default off
• active
• not active
Engine start/stop automatic is turned off by default. (codable in BDC)
Start/Stop-Automatic enabled in ECO mode
• active
• not active
Engine start/stop automatic is automatically activated in ECO mode. (codable in BDC)
**********************
Gear Shift Indicator
**********************
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. (codable in KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2’. (codable in KOMBI)
Gear shift indicator in sport mode
• active
• not active
Gear shift indicator is also shown in sport mode. (codable in KOMBI)
Gear shift indicator current gear
• active
• not active
Current gear is permanently displayed in the gear shift indicator. (codable in KOMBI)
Gear Shift Indicator menu
• active
• not active
Show menu in the iDrive settings to enable/disable the gear shift indicator. (codable in CIC)
**********************
Headlight Cleaning
**********************
Number until headlight cleaning
• 1
• 5
• 10
• 15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in BDC)
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (codable in BDC)
Maximum speed headlight cleaning
• 6 kph / 4 mph
• 12 kph / 8 mph
• 30 kph / 19 mph
• 50 kph / 31 mph
• 80 kph / 50 mph
• 130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in BDC)
Number of splashes for head lights
• 1
• 2
• 3
Number of splashes for cleaning the head lights. (codable in BDC)
Length of splash for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Length of a single splash for head light cleaning. (codable in BDC)
Delay between splashes for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Delay between splashes for head light cleaning. (codable in BDC)
Cleanings until 1st headlight cleaning
• not active
• 1
• 3
• 5
• 8
• 10
• 15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in BDC)
**********************
iDrive Menus
**********************
Tire pressure menu with temperature
• active
• not active
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. (codable in CIC)
Message length while driving
• no details
• one page
• up to five pages
• whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)
Sport display
• active
• not active
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)
Sport display – units
• active
• not active
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)
Gear Shift Indicator menu
• active
• not active
Show menu in the iDrive settings to enable/disable the gear shift indicator. (codable in CIC)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• ‘corrected’ speed
• true speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
Blank information display in dashboard
• active
• not active
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)
Date in dashboard
• active
• not active
Show date in dashboard. (codable in KOMBI)
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Cruise Control speed display
• not active
• 3 s
• 5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. (codable in KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2’. (codable in KOMBI)
Date incl. Time in dashboard
• active
• not active
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)
Gear shift indicator in sport mode
• active
• not active
Gear shift indicator is also shown in sport mode. (codable in KOMBI)
Bootlogo for dashboard
• BMW
• M
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)
Gear shift indicator current gear
• active
• not active
Current gear is permanently displayed in the gear shift indicator. (codable in KOMBI)
**********************
Legal Disclaimer
**********************
Legal disclaimer (US)
• not active
• active
• permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)
Camera disclaimer
• not active
• active
• permanent
Show legal disclaimer for rear view camera. (codable in CIC)
Night Vision disclaimer
• not active
• active
• permanent
Show legal disclaimer for night vision view camera. (codable in CIC)
**********************
Locking
**********************
Optical confirmation – locking vehicle
• not active
• 1
• 2
• 3
Number of times the turn signals are turned on when locking the vehicle. (codable in BDC)
Comfort close sunroof immediately
• active
• not active
Start closing the sunroof immediately during comfort closing. (codable in BDC)
Comfort close windows simultaneously
• active
• not active
Front and back windows close simultaneously during comfort closing. (codable in BDC)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in BDC)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in BDC)
Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in BDC)
**********************
Mirrors
**********************
Mirror tilt 1/2
• active
• not active
Requirement for mirror tilt functions. (codable in BDC)
Mirror tilt 2/2
• active
• not active
Requirement for mirror tilt functions. (codable in BDC)
Mirror fold with turn signals
• active
• not active
Mirrors can be folded via comfort closing while turn signals or hazard lights are active. (codable in BDC)
Comfort folding for sideview mirrors
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in BDC)
Unfold mirrors after comfort close
• active
• not active
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in BDC)
Tilt mirror in reverse
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in BDC)
Mirror tilt while reversing
• weak
• medium
• strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in BDC)
Auto-Unfold mirrors
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 40 kph / 25 mph
Speed at which folded mirrors are automatically unfolded. (codable in BDC)
Maximum speed mirror fold
• 10 kph / 6 mph
• 20 kph / 12 mph
• 40 kph / 25 mph
• 60 kph / 37 mph
Maximum speed at which folding the mirrors is possible. (codable in BDC)
**********************
Navigation
**********************
Navigation fuel stop suggestion
• active
• not active
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in CIC)
Route Info
• active
• not active
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in CIC)
Navigation geo coordinates
• active
• not active
Show geo coordinates in latitude and longitude in the navigation menu. (codable in CIC)
Navigation while updating
• active
• not active
Allow using the navigation system while the maps are being updated. (codable in CIC)
Arrow view in main window
• active
• not active
Arrow view is also available in the main window and not only in the split screen window. (codable in CIC)
Navigation current position
• active
• not active
Show option to display current position in the navigation menu. (codable in CIC)
**********************
Opening
**********************
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)
Optical confirmation – unlocking vehicle
• not active
• 1
• 2
• 3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in BDC)
Comfort open sunroof immediately
• active
• not active
Start opening the sunroof immediately during comfort opening. (codable in BDC)
Comfort open windows simultaneously
• active
• not active
Front and back windows open simultaneously during comfort opening. (codable in BDC)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in BDC)
**********************
Park Distance Control(PDC)
**********************
PDC in reverse
• active
• not active
Activate PDC as soon as car is rolling backwards/reversing. (codable in PDC)
Warning sound volume front
• very weak
• weak
• medium
• strong
• very strong
Volume for the warning sound of the front PDC. (codable in PDC)
Warning sound volume rear
• very weak
• weak
• medium
• strong
• very strong
Volume for the warning sound of the rear PDC. (codable in PDC)
PDC turn off – distance limit
• when putting in forward gear
• 1 m / 3 ft
• 10 m / 33 ft
• 20 m / 66 ft
• 50 m / 164 ft
• 75 m / 264 ft
• 100 m / 330 ft
• 150 m / 500 ft
• 200 m / 660 ft
• 250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)
PDC turn off – speed limit
• when putting in forward gear
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)
Reversing camera turn off – distance limit
• when putting in forward gear
• 1 m / 3 ft
• 10 m / 33 ft
• 20 m / 66 ft
• 50 m / 164 ft
• 75 m / 264 ft
• 100 m / 330 ft
• 150 m / 500 ft
• 200 m / 660 ft
• 250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)
Reversing camera turn off – speed limit
• when putting in forward gear
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)
PDC view
• vertical (F-Models)
• horizontal (E-Models)
Direction of park distance control view. (codable in CIC)
**********************
Parking Light
**********************
Parking lights
• active
• not active
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in BDC)
**********************
Power Windows
**********************
Continue window action when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in BDC)
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)
**********************
Rain Light Sensor
**********************
Rain light sensor sensitivity
• very sensitive
• sensitive
• normal
• insensitive
• daytime running lights
• standard
Sensitivity of rain light sensor. (codable in BDC)
**********************
Seating Heater
**********************
Seat heater temp. level 1 – armrest front
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in BDC)
Seat heater temp. level 2 – armrest front
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in BDC)
Seat heater temp. level 3 – armrest front
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in BDC)
Seat heater temp. level 1 – seat front
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in BDC)
Seat heater temp. level 2 – seat front
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in BDC)
Seat heater temp. level 3 – seat front
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in BDC)
Seat heater temp. level 1 – armrest rear
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in BDC)
Seat heater temp. level 2 – armrest rear
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in BDC)
Seat heater temp. level 3 – armrest rear
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in BDC)
Seat heater temp. level 1 – seat rear
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in BDC)
Seat heater temp. level 2 – seat rear
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in BDC)
Seat heater temp. level 3 – seat rear
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in BDC)
**********************
Speedometer
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• ‘corrected’ speed
• true speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
**********************
Sport display
**********************
Sport display
• active
• not active
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)
Sport display – units
• active
• not active
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)
**********************
Tail gate/Rear lid
**********************
Close trunk with keyfob
• active
• not active
Close the trunk/rear lid via the keyfob. To activate this function also deactivate ‘Panic alarm with remote’ in the CAS module. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL)
Close trunk with footwell switch
• active
• not active
Close the trunk/rear lid with the interior footwell switch. (codable in HKL)
Close trunk with keyfob – addition
• active
• not active
Only change this function with ‘Close trunk with keyfob’. (codable in HKL)
**********************
Tank
**********************
Message length while driving
• no details
• one page
• up to five pages
• whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)
**********************
Telephone
**********************
Message length while driving
• no details
• one page
• up to five pages
• whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)
**********************
Turn signals
**********************
Optical confirmation – unlocking vehicle
• not active
• 1
• 2
• 3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in BDC)
Optical confirmation – locking vehicle
• not active
• 1
• 2
• 3
Number of times the turn signals are turned on when locking the vehicle. (codable in BDC)
One-touch turn signal function
• 1
• 3
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. (codable in BDC)
**********************
Video in Motion
**********************
Video in motion 1/3
• not active
• 3 kph / 2 mph
• 8 kph / 5 mph
• active
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in CIC)
Video in motion 2/3
• not active
• 3 kph / 2 mph
• 10 kph / 6 mph
• active
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)
Video in motion 3/3
• active
• not active
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)
**********************
Voltage Monitoring
**********************
Low beams left voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in BDC)
Low beams left voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Low beams right voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in BDC)
Low beams right voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
High beams left voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in BDC)
High beams left voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
High beams right voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in BDC)
High beams right voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Turn signals front left voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in BDC)
Turn signals front left voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Turn signals front right voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in BDC)
Turn signals front right voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Front fog lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in BDC)
Front fog lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Front fog lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in BDC)
Front fog lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Daytime running lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in BDC)
Daytime running lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Daytime running lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in BDC)
Daytime running lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Turn signals front left warning
• active
• not active
Warning for malfunction of Turn signals front left in the on board computer. (codable in BDC)
Turn signals front right warning
• active
• not active
Warning for malfunction of Turn signals front right in the on board computer. (codable in BDC)
Turn signals rear left voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in BDC)
Turn signals rear left voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Turn signals rear right voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in BDC)
Turn signals rear right voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Standing lights outer rear left voltage monit. 1/2
• active
• not active
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights outer rear left voltage monit. 2/2
• active
• not active
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights outer rear right voltage monit. 1/2
• active
• not active
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights outer rear right voltage monit. 2/2
• active
• not active
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear left voltage monit. 1/2
• active
• not active
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear left voltage monit. 2/2
• active
• not active
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear right voltage monit. 1/2
• active
• not active
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear right voltage monit. 2/2
• active
• not active
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Reversing lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in BDC)
Reversing lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Reversing lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in BDC)
Reversing lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in BDC)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in BDC)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Brake lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in BDC)
Brake lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Brake lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in BDC)
Brake lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in BDC)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in BDC)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)
**********************
Warnings
**********************
Threshold for low range warning
• not active
• 8 km
• 10 km / 6 mi
• 20 km / 12 mi
• 50 km / 31 mi
• 8 mi
• 15 mi
• 30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)
Reverse gear gong
• active
• not active
Gong for reverse gear is active/not active. (codable in KOMBI)
Low beams left warning
• active
• active (alternative)
• not active
Warning for malfunction of Low beams left in the on board computer. (codable in BDC)
Low beams right warning
• active
• active (alternative)
• not active
Warning for malfunction of Low beams right in the on board computer. (codable in BDC)
High beams left warning
• active
• active (alternative)
• not active
Warning for malfunction of High beams left in the on board computer. (codable in BDC)
High beams right warning
• active
• active (alternative)
• not active
Warning for malfunction of High beams right in the on board computer. (codable in BDC)
Front fog lights left warning
• active
• active (alternative)
• not active
Warning for malfunction of Front fog lights left in the on board computer. (codable in BDC)
Front fog lights right warning
• active
• not active
Warning for malfunction of Front fog lights right in the on board computer. (codable in BDC)
Daytime running lights left warning
• active
• active (alternative)
• active (Japan)
• not active
Warning for malfunction of Daytime running lights left in the on board computer. (codable in BDC)
Daytime running lights right warning
• active
• active (alternative)
• active (alternative)
• active (Japan)
• not active
Warning for malfunction of Daytime running lights right in the on board computer. (codable in BDC)
Turn signals rear left warning
• active
• not active
Warning for malfunction of Turn signals rear left in the on board computer. (codable in BDC)
Turn signals rear right warning
• active
• not active
Warning for malfunction of Turn signals rear right in the on board computer. (codable in BDC)
Standing lights outer rear left warning
• active
• active (alternative)
• not active
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights outer rear right warning
• active
• active (alternative)
• not active
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear left warning
• active
• not active
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Standing lights inner rear right warning
• active
• not active
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Reversing lights left warning
• active
• active (alternative)
• not active
Warning for malfunction of left reversing lights in the on board computer. (codable in BDC)
Reversing lights right warning
• active
• active (alternative)
• not active
Warning for malfunction of right reversing lights in the on board computer. (codable in BDC)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (codable in BDC)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (codable in BDC)
Brake lights left warning
• active
• active (alternative)
• not active
Warning for malfunction of left braking lights in the on board computer. (codable in BDC)
Brake lights right warning
• active
• active (alternative)
• not active
Warning for malfunction of right braking lights in the on board computer. (codable in BDC)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (codable in BDC)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (codable in BDC)
Seat belt reminder driver
• active
• not active
Seat belt reminder for driver is active/ inactive. (codable in CSM)
Seat belt reminder passenger
• active
• not active
Seat belt reminder for passenger is active/ inactive. (codable in CSM)
Seat belt reminder – distance
• 100 m / 330 ft
• 200 m / 660 ft
• 500 m / 0.31 mls
• 1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in CSM)
Seat belt reminder – speed
• 10 kph / 6 mph
• 20 kph / 12 mph
• 30 kph / 19 mph
• 50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in CSM)
**********************
Welcome Light
**********************
Welcome lights – standing lights front left
• not active
• turn on softly
• turn on hard
Standing lights front left are turned on with welcome lights. (codable in BDC)
Welcome lights – standing lights front right
• not active
• turn on softly
• turn on hard
Standing lights front right are turned on with welcome lights. (codable in BDC)
Welcome lights – DRL left
• not active
• turn on softly
• turn on hard
Daytime running lights left are turned on with welcome lights. (codable in BDC)
Welcome lights – DRL right
• not active
• turn on softly
• turn on hard
Daytime running lights right are turned on with welcome lights. (codable in BDC)
Welcome lights – low beams left
• not active
• turn on softly
• turn on hard
Low beams left are turned on with welcome lights. (codable in BDC)
Welcome lights – low beams right
• not active
• turn on softly
• turn on hard
Low beams right are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signal front left
• not active
• turn on softly
• turn on hard
Turn signal front left are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signal front right
• not active
• turn on softly
• turn on hard
Turn signal front right are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signal mid left
• not active
• turn on softly
• turn on hard
Turn signal mid (mirrors) left are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signal mid right
• not active
• turn on softly
• turn on hard
Turn signal mid (mirrors) right are turned on with welcome lights. (codable in BDC)
Welcome lights – design lights left
• not active
• turn on softly
• turn on hard
Design lights left are turned on with welcome lights. (codable in BDC)
Welcome lights – design lights right
• not active
• turn on softly
• turn on hard
Design lights right are turned on with welcome lights. (codable in BDC)
Welcome lights – high beams left
• not active
• turn on softly
• turn on hard
High beams left are turned on with welcome lights. (codable in BDC)
Welcome lights – high beams right
• not active
• turn on softly
• turn on hard
High beams right are turned on with welcome lights. (codable in BDC)
Welcome lights – front fog lights left
• not active
• turn on softly
• turn on hard
Front fog lights left are turned on with welcome lights. (codable in BDC)
Welcome lights – front fog lights right
• not active
• turn on softly
• turn on hard
Front fog lights right are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signals rear left
• not active
• turn on softly
• turn on hard
Turn signals rear left are turned on with welcome lights. (codable in BDC)
Welcome lights – turn signals rear right
• not active
• turn on softly
• turn on hard
Turn signals rear right are turned on with welcome lights. (codable in BDC)
Welcome lights – stand. lights outer rear left
• not active
• turn on softly
• turn on hard
Outer standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Welcome lights – stand. lights outer rear right
• not active
• turn on softly
• turn on hard
Outer standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Welcome lights – stand. lights inner rear left
• not active
• turn on softly
• turn on hard
Inner standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)
Welcome lights – reversing lights left
• not active
• turn on softly
• turn on hard
Reversing lights left are turned on with welcome lights. (codable in BDC)
Welcome lights – reversing lights right
• not active
• turn on softly
• turn on hard
Reversing lights right are turned on with welcome lights. (codable in BDC)
Welcome lights – rear fog lights left
• not active
• turn on softly
• turn on hard
Rear left fog lights are turned on with welcome lights. (codable in BDC)
Welcome lights – rear fog lights right
• not active
• turn on softly
• turn on hard
Rear right fog lights are turned on with welcome lights. (codable in BDC)
Welcome lights – braking lights left
• not active
• turn on softly
• turn on hard
Braking lights left are turned on with welcome lights. (codable in BDC)
Welcome lights – braking lights right
• not active
• turn on softly
• turn on hard
Braking lights right are turned on with welcome lights. (codable in BDC)
Welcome lights – third brake light
• not active
• turn on softly
• turn on hard
Third brake light is turned on with welcome lights. (codable in BDC)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
Number plate lights are turned on with welcome lights. (codable in BDC)
Welcome lights
• active
• not active
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in BDC)
Welcome lights – only when dark
• active
• not active
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in BDC)
Welcome-lights – light switch position
• not active
• A
• A or 2
Positions for the light switch where the welcome-lights function is activated. (codable in BDC)
Welcome lights – brightness
• off
• very low
• low
• medium
• high
• very high
Brightness of exterior lights for welcome lights. (codable in BDC)
Welcome lights duration
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in BDC)
**********************
Please see ...
http://support.mycarly.com/knowledge-base/code-bmw-what-is-possible/?utm_source=home&utm_medium=direct&utm_campaign=home
for latest information
**********************
Carly for BMW Coding Menu X3 (F25)
-------------------------------------------------------------------
**********************
Cleaning
**********************
Number of wipes after windscreen cleaning
• 1
• 2
• 3
• 4
Number of wipes after windscreen is cleaned. (codable in JBBF)
Number of wipes after rear window cleaning
• 1
• 2
• 3
• 4
Number of wipes after rear window is cleaned. (codable in JBBF)
Reduce wiper speed
• 210 kph / 130 mph
• not active
Threshold at which the wiper speed is reduced. (codable in JBBF)
Rear window cleaning with low washer liquid
• active
• not active
Rear windows are also cleaned even though the washer fluid level is low. (codable in JBBF)
Wipe delay after windowscreen cleaning
• 0.1 s
• 0.3 s
• 0.5 s
• 0.7 s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in JBBF)
Wipe delay after rear window cleaning
• 0.1 s
• 0.3 s
• 0.5 s
• 0.7 s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in JBBF)
Wiping interval standstill
• 3s
• 5s
Interval in seconds for windscreen wipers at standstill. (codable in JBBF)
Windscreen wipers continue
• active
• not active
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in JBBF)
Number until headlight cleaning
• 1
• 5
• 10
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in JBBF)
Continue rear wiper when igntion turned on
• active
• not active
Rear wiper continue wiping and don’t interrupt, when the ignition is turned on. (codable in JBBF)
Rear wiper permanent when reversing
• active
• not active
When rear wipers are active while reversing, they are automatically set to permament wiping. (codable in JBBF)
Rear wiper in reverse gear
• active
• not active
Rear wiper automatically turns on in reverse gear when front wipers are active. (codable in JBBF)
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (codable in JBBF)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (codable in JBBF)
Length of splash for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Length of a single splash for head light cleaning. (codable in JBBF)
Delay between splashes for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Delay between splashes for head light cleaning. (codable in JBBF)
Maximum speed headlight cleaning
• not active
• 160 kph / 100 mph
Maximum speed at which folding headlight cleaning is possible. (codable in JBBF)
**********************
Clock/Date
**********************
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Date incl. Time in dashboard
• active
• not active
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)
**********************
Comfort Functions
**********************
Comfort open sunroof immediately
• active
• not active
Start opening the sunroof immediately during comfort opening. (codable in CAS)
Comfort open windows simultaneously
• active
• not active
Front and back windows open simultaneously during comfort opening. (codable in CAS)
Comfort close windows simultaneously
• active
• not active
Front and back windows close simultaneously during comfort closing. (codable in CAS)
Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in CAS)
Comfort close sunroof immediately
• active
• not active
Start closing the sunroof immediately during comfort closing. (codable in CAS)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)
**********************
Coming Home
**********************
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in FRM)
Follow me home lights duration
• off
• 40s
• 90s
• 150s
• 240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flash to pass, while the enginge is off. (codable in FRM)
**********************
Daytime Running Lights
**********************
Daytime running lights – customization
• not active
• High beams
• Low beams
• Angel eyes + Rear lights (EU)
• Angel eyes (EU)
• Angel eyes + Rear lights (US)
• Angel eyes (US)
• Front lights (Northern Europe)
Mode of daytime running lights. Daytime running lights can be manually activated by putting the light switch to position ‘0’. (codable in FRM)
Daytime running lights – brightness
• very low
• low
• rather low
• medium (US)
• medium (EU)
• rather high
• high
• very high
Brightness of the configured daytime running lights. (codable in FRM)
Daytime running lights – high beams brightness
• very low
• low
• medium
• high
• very high
Brightness of high beams for daytime running lights and general use. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. (codable in FRM)
**********************
Easy Entry
**********************
Easy entry – steering wheel 1/2
• active
• not active
Also adjust the steering wheel position when easy entry is activated. (codable in FRM)
Easy entry – steering wheel 2/2
• active
• not active
Only change this function with ‘Easy entry – steering wheel 1/2’. (codable in FRM)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in CAS)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in CAS)
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)
**********************
Engine Start Stop
**********************
Start/Stop-Automatic memory
• active
• not active
Setting for Start/Stop-Automatic is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in CAS)
Start/Stop-Automatic default off
• active
• not active
Engine start/stop automatic is turned off by default. (codable in CAS)
**********************
Flash to Pass
**********************
Flash to pass with bi-xenon
• active
• not active
Bi-xenon lamps are used for flash to pass. (codable in FRM)
**********************
Gear Shift Indicator
**********************
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. (codable in KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2’. (codable in KOMBI)
Gear shift indicator in sport mode
• active
• not active
Gear shift indicator is also shown in sport mode. (codable in KOMBI)
Gear shift indicator current gear
• active
• not active
Current gear is permanently displayed in the gear shift indicator. (codable in KOMBI)
Gear Shift Indicator menu
• active
• not active
Show menu in the iDrive settings to enable/disable the gear shift indicator. (codable in CIC)
**********************
Headlight Cleaning
**********************
Number until headlight cleaning
• 1
• 5
• 10
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in JBBF)
Head light cleaning
• active
• not active
Turn head light cleaning on/off. (codable in JBBF)
Number of splashes for head lights
• 2
• 3
Number of splashes for cleaning the head lights. (codable in JBBF)
Length of splash for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Length of a single splash for head light cleaning. (codable in JBBF)
Delay between splashes for head lights
• 0.6 s
• 0.8 s
• 1.0 s
• 1.2 s
• 1.4 s
• 1.6 s
• 1.8 s
• 2.0 s
Delay between splashes for head light cleaning. (codable in JBBF)
Maximum speed headlight cleaning
• not active
• 160 kph / 100 mph
Maximum speed at which folding headlight cleaning is possible. (codable in JBBF)
**********************
High Beam
**********************
Daytime running lights – high beams brightness
• very low
• low
• medium
• high
• very high
Brightness of high beams for daytime running lights and general use. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. (codable in FRM)
Highbeam assisstent automatically turned on
• active
• not active
High beam assisstent is automatically turned on. (codable in FRM)
**********************
iDrive Menus
**********************
Daytime running lights – high beams brightness
• very low
• low
• medium
• high
• very high
Brightness of high beams for daytime running lights and general use. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. (codable in FRM)
Highbeam assisstent automatically turned on
• active
• not active
High beam assisstent is automatically turned on. (codable in FRM)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• ‘corrected’ speed
• true speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
Blank information display in dashboard
• active
• not active
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)
Date in dashboard
• active
• not active
Show date in dashboard. (codable in KOMBI)
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Cruise Control speed display
• not active
• 3 s
• 5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)
Gear shift indicator 1/2
• active
• not active
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. (codable in KOMBI)
Gear shift indicator 2/2
• active
• not active
Only change with ‘Gear shift indicator 1/2’. (codable in KOMBI)
Date incl. Time in dashboard
• active
• not active
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)
Gear shift indicator in sport mode
• active
• not active
Gear shift indicator is also shown in sport mode. (codable in KOMBI)
Bootlogo for dashboard
• BMW
• M
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)
Gear shift indicator current gear
• active
• not active
Current gear is permanently displayed in the gear shift indicator. (codable in KOMBI)
**********************
Interior Lights
**********************
Interior lights after turning off
• active
• not active
Interior lights are turned on when ignition is turned off after driving with turned on lights. (codable in FRM)
**********************
Legal Disclaimer
**********************
Legal disclaimer (US)
• not active
• active
• permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)
Camera disclaimer
• not active
• active
• permanent
Show legal disclaimer for rear view camera. (codable in CIC)
Night Vision disclaimer
• not active
• active
• permanent
Show legal disclaimer for night vision view camera. (codable in CIC)
**********************
Locking
**********************
Lock vehicle at x kph
• active
• not active
Automatically lock the vehicle at the set threshold speed. (codable in CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 4 kph / 2 mph
• 8 kph / 5 mph
• 16 kph / 10 mph
• 24 kph / 15 mph
• 32 kph / 20 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)
Lock vehicle at x kph only once
• active
• not active
The vehicle is automatically locked only the first time the set speed is reached. (codable in CAS)
Comfort close windows simultaneously
• active
• not active
Front and back windows close simultaneously during comfort closing. (codable in CAS)
Comfort closing delay (mirrors)
• 0.0s
• 0.5s
• 1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in CAS)
Automatically lock vehicle duration
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened. (codable in CAS)
Comfort close sunroof immediately
• active
• not active
Start closing the sunroof immediately during comfort closing. (codable in CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)
**********************
Mirrors
**********************
Mirror tilt 1/2
• active
• not active
Requirement for mirror tilt functions. (codable in FRM)
Comfort folding for sideview mirrors
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in FRM)
Tilt mirror in reverse
• active
• not active
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in FRM)
Mirror tilt while reversing
• weak
• medium
• strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in FRM)
Auto-Unfold mirrors
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 40 kph / 25 mph
Speed at which folded mirrors are automatically unfolded. (codable in FRM)
Maximum speed mirror fold
• 10 kph / 6 mph
• 20 kph / 12 mph
• 40 kph / 25 mph
• 60 kph / 37 mph
Maximum speed at which folding the mirrors is possible. (codable in FRM)
Mirror tilt 2/2
• active
• not active
Requirement for mirror tilt functions. (codable in FRM)
Mirror fold with turn signals
• active
• not active
Mirrors can be folded via comfort closing while turn signals or hazard lights are active. (codable in FRM)
**********************
Navigation
**********************
Navigation fuel stop suggestion
• active
• not active
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in CIC)
Route Info
• active
• not active
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in CIC)
Navigation geo coordinates
• active
• not active
Show geo coordinates in latitude and longitude in the navigation menu. (codable in CIC)
Navigation while updating
• active
• not active
Allow using the navigation system while the maps are being updated. (codable in CIC)
Arrow view in main window
• active
• not active
Arrow view is also available in the main window and not only in the split screen window. (codable in CIC)
Navigation current position
• active
• not active
Show option to display current position in the navigation menu. (codable in CIC)
**********************
Opening
**********************
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4’ is activated. (codable in CAS)
Comfort open sunroof immediately
• active
• not active
Start opening the sunroof immediately during comfort opening. (codable in CAS)
Comfort open windows simultaneously
• active
• not active
Front and back windows open simultaneously during comfort opening. (codable in CAS)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in CAS)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in CAS)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)
**********************
Park Distance Control(PDC)
**********************
PDC in reverse
• active
• not active
Activate PDC as soon as car is rolling backwards/reversing. (codable in PDC)
Warning sound volume front
• very weak
• weak
• medium
• strong
• very strong
Volume for the warning sound of the front PDC. (codable in PDC)
Warning sound volume rear
• very weak
• weak
• medium
• strong
• very strong
Volume for the warning sound of the rear PDC. (codable in PDC)
PDC turn off – distance limit
• when putting in forward gear
• 1 m / 3 ft
• 10 m / 33 ft
• 20 m / 66 ft
• 50 m / 164 ft
• 75 m / 264 ft
• 100 m / 330 ft
• 150 m / 500 ft
• 200 m / 660 ft
• 250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)
PDC turn off – speed limit
• when putting in forward gear
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)
Reversing camera turn off – distance limit
• when putting in forward gear
• 1 m / 3 ft
• 10 m / 33 ft
• 20 m / 66 ft
• 50 m / 164 ft
• 75 m / 264 ft
• 100 m / 330 ft
• 150 m / 500 ft
• 200 m / 660 ft
• 250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)
Reversing camera turn off – speed limit
• when putting in forward gear
• 1 kph / 1 mph
• 10 kph / 6 mph
• 20 kph / 12 mph
• 36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)
PDC view
• vertical (F-Models)
• horizontal (E-Models)
Direction of park distance control view. (codable in CIC)
**********************
Power Windows
**********************
Continue window action when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in FRM)
Close window after easy entry
• active
• not active
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in CAS)
Easy entry with every door open
• active
• not active
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in CAS)
Easy entry
• active
• not active
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)
**********************
Rain Light Sensor
**********************
Rain light sensor sensitivity
• very sensitive
• sensitive
• normal
• insensitive
Sensitivity of rain light sensor. (codable in JBBF)
**********************
Seating Heater
**********************
Seat heater temp. level 1 – armrest front
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in JBBF)
Seat heater temp. level 2 – armrest front
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in JBBF)
Seat heater temp. level 3 – armrest front
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in JBBF)
Seat heater temp. level 1 – seat front
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in JBBF)
Seat heater temp. level 2 – seat front
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in JBBF)
Seat heater temp. level 3 – seat front
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in JBBF)
Seat heater temp. level 1 – armrest rear
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in JBBF)
Seat heater temp. level 2 – armrest rear
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in JBBF)
Seat heater temp. level 3 – armrest rear
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in JBBF)
Seat heater temp. level 1 – seat rear
• 25°C / 77°F
• 26°C / 79°F
• 27°C / 81°F
• 28°C / 82°F
• 29°C / 84°F
• 30°C / 86°F
• 31°C / 88°F
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in JBBF)
Seat heater temp. level 2 – seat rear
• 32°C / 90°F
• 33°C / 91°F
• 34°C / 93°F
• 35°C / 95°F
• 36°C / 97°F
• 37°C / 99°F
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in JBBF)
Seat heater temp. level 3 – seat rear
• 38°C / 100°F
• 39°C / 102°F
• 40°C / 104°F
• 41°C / 106°F
• 42°C / 108°F
• 43°C / 109°F
• 44°C / 111°F
• 45°C / 113°F
• 46°C / 115°F
• 47°C / 117°F
• 48°C / 118°F
• 49°C / 120°F
• 50°C / 122°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in JBBF)
**********************
Spedometer
**********************
Digital speedometer
• active
• not active
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)
Correction’ analog speedometer
• ‘corrected’ speed
• true speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)
**********************
Sport display
**********************
Sport display
• active
• not active
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)
Sport display – units
• active
• not active
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)
**********************
Tail gatre/Rear lid
**********************
Close trunk with keyfob
• active
• not active
Close the trunk/rear lid via the keyfob. To activate this function also deactivate ‘Panic alarm with remote’ in the CAS module. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL)
Close trunk with footwell switch
• active
• not active
Close the trunk/rear lid with the interior footwell switch. (codable in HKL)
Close trunk with keyfob – addition
• active
• not active
Only change this function with ‘Close trunk with keyfob’. (codable in HKL)
**********************
Tank
**********************
Threshold for low range warning
• not active
• 8 km
• 10 km / 6 mi
• 20 km / 12 mi
• 50 km / 31 mi
• 8 mi
• 15 mi
• 30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)
**********************
Telphone
**********************
Message length while driving
• no details
• one page
• up to five pages
• whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)
**********************
Turn signals
**********************
One-touch turn signal function
• 1
• 3
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. (codable in FRM)
**********************
Video in Motion
**********************
Video in motion 1/3
• not active
• 3 kph / 2 mph
• 8 kph / 5 mph
• active
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in CIC)
Video in motion 2/3
• not active
• 3 kph / 2 mph
• 10 kph / 6 mph
• active
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)
Video in motion 3/3
• active
• not active
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)
**********************
Voltage Monitoring
**********************
Low beams left voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in FRM)
Low beams left voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Low beams right voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in FRM)
Low beams right voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
High beams left voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in FRM)
High beams left voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
High beams right voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in FRM)
High beams right voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Angel Eyes left voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes/standing lights front left. Might cause flickering of LED lights. (codable in FRM)
Angel Eyes left voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Angel Eyes right voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes/standing lights front right. Might cause flickering of LED lights. (codable in FRM)
Angel Eyes right voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Turn signals front left voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in FRM)
Turn signals front left voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Turn signals front right voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in FRM)
Turn signals front right voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Front fog lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in FRM)
Front fog lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Front fog lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in FRM)
Front fog lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Park lights rear left voltage monit. 1/2
• active
• not active
Voltage monitoring for park lights rear left. Might cause flickering of LED lights. (codable in FRM)
Park lights rear left voltage monit. 2/2
• active
• not active
Deactivate with ‘Park lights rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Park lights rear right voltage monit. 1/2
• active
• not active
Voltage monitoring for park lights rear right. Might cause flickering of LED lights. (codable in FRM)
Park lights rear right voltage monit. 2/2
• active
• not active
Deactivate with ‘Park lights rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Turn signals rear left voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in FRM)
Turn signals rear left voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Turn signals rear right voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in FRM)
Turn signals rear right voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Reversing lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in FRM)
Reversing lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Reversing lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in FRM)
Reversing lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in FRM)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in FRM)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Brake lights left voltage monit. 1/2
• active
• not active
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in FRM)
Brake lights left voltage monit. 2/2
• active
• not active
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Brake lights right voltage monit. 1/2
• active
• not active
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in FRM)
Brake lights right voltage monit. 2/2
• active
• not active
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in FRM)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in FRM)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)
**********************
Warnings
**********************
Threshold for low range warning
• not active
• 8 km
• 10 km / 6 mi
• 20 km / 12 mi
• 50 km / 31 mi
• 8 mi
• 15 mi
• 30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)
Reverse gear gong
• active
• not active
Gong for reverse gear is active/not active. (codable in KOMBI)
Seat belt reminder driver
• active
• not active
Seat belt reminder for driver is active/ inactive. (codable in CSM)
Seat belt reminder passenger
• active
• not active
Seat belt reminder for passenger is active/ inactive. (codable in CSM)
Seat belt reminder – distance
• 100 m / 330 ft
• 200 m / 660 ft
• 500 m / 0.31 mls
• 1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in CSM)
Seat belt reminder – speed
• 10 kph / 6 mph
• 20 kph / 12 mph
• 30 kph / 19 mph
• 50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in CSM)
**********************
Welcome Light
**********************
Welcome-lights – light switch position
• not active
• A
• A or 2
Positions for the light switch where the welcome-lights function is activated. (codable in FRM)
Welcome lights duration
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in FRM)
Welcome lights – low beams
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Low beams are turned on with welcome lights. (codable in FRM)
Welcome lights – corner LEDs
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (codable in FRM)
Welcome lights – high beams
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
High beams are turned on with welcome lights. (codable in FRM)
Welcome lights – front fog lights
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Front fog lights are turned on with welcome lights. (codable in FRM)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Number plate lights are turned on with welcome lights. (codable in FRM)
Welcome lights – rear lights
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Rear lights are turned on with welcome lights. (codable in FRM)
Welcome lights – standing lights front
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Standing lights front are turned on with welcome lights. (codable in FRM)
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on softly (LED)
• turn on hard
Standing lights rear are turned on with welcome lights. (codable in FRM)
**********************
Please see ...
http://support.mycarly.com/knowledge-base/code-bmw-what-is-possible/?utm_source=home&utm_medium=direct&utm_campaign=home
for latest information
**********************
登録:
投稿 (Atom)