-------------------------------------------------------------------
- Coding Menu 1er(E8X,F81,E82,E87,E88) 1er(F2X,F20) 2er(F2X,F22,F23,F87) 2er(F45,F46) 3er(E46) 3er(E9X,E90,E91,E92) 3er(F3X,F31,F32,F34,F80) 3er(G2x, G20,G21) 5er(E6X,F60,E61) 5er(Fxx) 7er(E6x,E65,E66,E67,E68) 7er(F0x,F01,F02) X1(E84) X1(F48) X3(E83) X3(F25) X5(E70) Z4 (E89) Mini (2007-, except R52)
as of 2016.05
**********************
Cornering Light
**********************
Cornering lights 1/3
• active
• not active
Use front fog lights/high beams as cornering lights. Also, this function
often requires adaptive headlights to be installed. (codable in LMA)
Cornering lights 2/3
• active
• not active
Only change this function with ‘Cornering lights 1/3′. (codable in LMA)
Cornering lights 3/3
• active
• not active
Only change this function with ‘Cornering lights 1/3′. (codable in LMA)
Cornering lights – reverse gear
• active
• not active
Use cornering lights also when reversing. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – brightness
• off
• low
• medium
• high
Brightness of ‘Cornering lights’. Only works if ‘Cornering lights’ is also activated. (codable in LMA)
Cornering lights – key 1
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering
lights’ for key 1. Only works if ‘Cornering lights’ is also activated.
(codable in LMA)
Cornering lights – key 2
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering
lights’ for key 2. Only works if ‘Cornering lights’ is also activated.
(codable in LMA)
Cornering lights – key 3
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering
lights’ for key 3. Only works if ‘Cornering lights’ is also activated.
(codable in LMA)
Cornering lights – key 4
• active
• not active
Cornering lights are active/not active. Separate setting for ‘Cornering
lights’ for key 4. Only works if ‘Cornering lights’ is also activated.
(codable in LMA)
**********************
Turn signals
**********************
Hazard lights
• standard
• double
Hazard lights blink once or twice. (codable in LMA)
Crash lights
• standard
• double
Hazard lights blink once or twice upon an accident. (codable in LMA)
One-touch turn signal function
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. If available,
please activate this option for the different keys as well. In some
cases, this option also needs to be enabled in the iDrive. (codable in
LMA)
One-touch turn signal function Key 1
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting
for ‘One-touch turn signal function’ for key 1. (codable in LMA)
One-touch turn signal function Key 2
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting
for ‘One-touch turn signal function’ for key 2. (codable in LMA)
One-touch turn signal function Key 3
• 1
• 3
• 5
Number of turn signals when tapping the turn signal. Separate setting
for ‘One-touch turn signal function’ for key 3. (codable in LMA)
**********************
Brake lights
**********************
Brake force display
• active
• not active
Customized brake lights turn on or flash when braking hard. Use the
codings below to customize the brake force display. (codable in LMA)
Brake force display – tail lights
• on
• flashing
Customization for tail lights for brake force display. In order to
enable this option, activate ‘Brake force display’ as well. (codable in
LMA)
Brake force display – angel eyes
• off
• on
• flashing
Customization for angel eyes for brake force display. In order to enable
this option, activate ‘Brake force display’ as well. (codable in LMA)
Brake force display – outer brake lights
• off
• on
• flashing
Customization for outer brake lights for brake force display. In order
to enable this option, activate ‘Brake force display’ as well. (codable
in LMA)
Brake force display – inner brake lights
• off
• on
• flashing
Customization for inner brake lights for brake force display. In order
to enable this option, activate ‘Brake force display’ as well. (codable
in LMA)
Brake force display – rear fog lights
• off
• on
• flashing
Customization for rear fog lights for brake force display. In order to
enable this option, activate ‘Brake force display’ as well. (codable in
LMA)
**********************
iDrive Menus
**********************
Audible confirmation menu
• active
• not active
Show menu for audible confirmation for locking/unlocking in iDrive. This
coding only works when the DWA module is installed. (codable in CIC)
Address book menu
• active
• not active
Show menu for address book in iDrive. (codable in CIC)
Notepad menu
• active
• not active
Show menu for notepad in iDrive. (codable in CIC)
**********************
Locking
**********************
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. (codable in CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not
active’. This coding cannot be used to activate a retrofitted comfort
access. When the comfort access is deactivated, neither closing nor
opening the car via the door handle will work. Turning the ignition and
engine on/off without putting the key into the ignition (also known as
‘Keyless Go’) will also not work anymore. Therefore the car cannot be
stolen anymore by tricking the comfort access. In order to activate
comfort access again, please set this coding to ‘active’. (codable in
CAS)
Lock tailgate when car locked
• active
• not active
Tailgate cannot be unlocked, when car is locked. (codable in CAS)
Automatically lock vehicle duration
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes until doors are locked after car was unlocked but no windows or doors have been opened. (codable in CAS)
Automatically lock vehicle Key 1
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 1
If no door or window has been opened two minutes after the car has been
unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 2
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 2
If no door or window has been opened two minutes after the car has been
unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 3
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 3
If no door or window has been opened two minutes after the car has been
unlocked, the doors automatically lock. (codable in CAS)”
Automatically lock vehicle Key 4
• active
• not active
“Separate setting for ‘Automatically lock vehicle’ for key 4
If no door or window has been opened two minutes after the car has been
unlocked, the doors automatically lock. (codable in CAS)”
Lock vehicle upon ignition
• active
• not active
Vehicle is locked, when ignition is turned on. (codable in CAS)
Threshold speed for vehicle locking
• 2 kph / 1 mph
• 6 kph / 4 mph
• 12 kph / 8 mph
• 18 kph / 11 mph
• 24 kph / 15 mph
• 30 kph / 19 mph
“Sets the speed at which the vehicle automatically locks all doors.
To activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)”
Lock vehicle at x kph Key 1
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in CAS)
Lock vehicle at x kph Key 2
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in CAS)
Lock vehicle at x kph Key 3
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in CAS)
Lock vehicle at x kph Key 4
• active
• not active
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in CAS)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. (codable in LMA)
Optical confirmation lock vehicle Key 1
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate
setting for ‘Optical confirmation for locking’ for key 1. (codable in
LMA)
Optical confirmation lock vehicle Key 2
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate
setting for ‘Optical confirmation for locking’ for key 2. (codable in
LMA)
Optical confirmation lock vehicle Key 3
• active
• not active
Optical confirmation for locking vehicle is active/not active. Separate
setting for ‘Optical confirmation for locking’ for key 3. (codable in
LMA)
Audible confirmation – locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. Only
works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
Optical confirmation – locking vehicle
• active
• not active
Optical confirmation for locking vehicle is active/not active. Only
works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
**********************
Angel Eyes
**********************
Daytime running lights – angel eyes
• active
• not active
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – angel eyes brightness
• off
• very low
• low
• medium
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. (codable in LMA)
Daytime running lights – angel eyes brightness (alternative)
• off
• very low
• low
• rather low
• rather high
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. Use this function,
if ‘Daytime running lights – angel eyes brightness’ does not show any
effect. (codable in LMA)
**********************
Easy Entry
**********************
Easy entry
• active
• not active
Press the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 1
• active
• not active
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 2
• active
• not active
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 3
• active
• not active
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 4
• active
• not active
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
**********************
Power Windows
**********************
Power windows after ignition off
• active
• not active
Power windows are active for another minute after ignition is turned off. (codable in CAS)
Power windows after ignition off
• 1 min
• 2 min
• 5 min
• 10 min
• 15 min
Duration in minutes, for which power windows are active after turning off the ignition. (codable in CAS)
Easy entry
• active
• not active
Press the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 1
• active
• not active
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 2
• active
• not active
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 3
• active
• not active
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 4
• active
• not active
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
**********************
High Beam
**********************
Front fog lights with high beams
• active
• not active
Front fog lights are automatically turned off when activating high beams. (codable in LMA)
**********************
Tail gate/Rear lid
**********************
Unlock rear window
• active
• not active
Key unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 1
• active
• not active
Key 1 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 2
• active
• not active
Key 2 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 3
• active
• not active
Key 3 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window key 4
• active
• not active
Key 4 unlocks rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window via outside button
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. (codable in CAS)
Unlock rear window via outside button Key 1
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)
Unlock rear window via outside button Key 2
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)
Unlock rear window via outside button Key 3
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)
Unlock rear window via outside button Key 4
• active
• not active
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)
Unlock rear window with footwell switch
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. (codable in CAS)
Open rear window via footwell switch Key 1
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)
Open rear window via footwell switch Key 2
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)
Open rear window via footwell switch Key 3
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)
Open rear window via footwell switch Key 4
• active
• not active
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)
Close trunk with footwell switch
• not active
• active
Close the trunk/rear lid with the interior footwell switch. (codable in HKL)
Close trunk with keyfob
• not active
• active
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL)
**********************
Coming Home
**********************
Activate follow me home lights
• active
• not active
Follow me home lights are active/not active. (codable in LMA)
Follow me home lights duration
• off
• 40s
• 90s
• 150s
• 240s
Duration of follow me home lights in seconds. To activate follow me home
lights, activate the flasher, while the enginge is off. (codable in
LMA)
Follow me home lights duration Key 1
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 1. (codable in LMA)
Follow me home lights duration Key 2
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 2. (codable in LMA)
Follow me home lights duration Key 3
• off
• 40s
• 90s
• 150s
• 240s
Separate setting for duration in seconds of follow me home lights for key 3. (codable in LMA)
Follow me home lights with remote
• active
• not active
Quickly press the ‘Open trunk’ button twice to activate the follow me
home lights. In some circumstances the function ‘Panic mode remote’ in
the CAS has to be activated, too. (codable in LMA)
Cancel follow me home lights
• active
• not active
Follow me home lights are cancelled, when activating the flasher again. (codable in LMA)
Extend follow me home lights
• active
• not active
Follow me home lights are displayed longer, when activating the flasher again. (codable in LMA)
Follow me home lights – dashboard lights
• active
• not active
Follow me home lights for dashboard instruments are active/not active. (codable in LMA)
Follow me home lights – low beams
• active
• not active
Follow me home lights for low beams are active/not active. (codable in LMA)
Follow me home lights – brake lights
• active
• not active
Follow me home lights for brake lights are active/not active. (codable in LMA)
Follow me home lights – turn signals rear
• active
• not active
Follow me home lights for turn signals rear are active/not active. (codable in LMA)
Follow me home lights – turn signals front
• active
• not active
Follow me home lights for turn signals front are active/not active. (codable in LMA)
Follow me home lights – high beams
• active
• not active
Follow me home lights for high beams are active/not active. (codable in LMA)
Follow me home lights – number plates
• active
• not active
Follow me home lights for number plates are active/not active. (codable in LMA)
Follow me home lights – fog lights rear
• active
• not active
Follow me home lights for fog lights rear are active/not active. (codable in LMA)
Follow me home lights – fog lights front
• active
• not active
Follow me home lights for fog lights front are active/not active. (codable in LMA)
Follow me home lights – reversing lights
• active
• not active
Follow me home lights for reversing lights are active/not active. (codable in LMA)
Follow me home lights – tail lights
• active
• not active
Follow me home lights for tail lights are active/not active. (codable in LMA)
Follow me home lights – inner tail lights
• active
• not active
Follow me home lights for inner tail lights are active/not active. (codable in LMA)
Follow me home lights – park lights
• active
• not active
Follow me home lights for parking lights are active/not active. (codable in LMA)
**********************
Head-Up Display
**********************
Turn signals in Head-Up Display
• not active
• active
Show turn signals and hazard lights in the head up display. (codable in HUD)
Head-Up Display brightness
• standard
• high
Increase the brightness of the Head-Up display. (codable in HUD)
Head-Up Display brightness Key 1
• standard
• high
Increase the brightness of the Head-Up display. Separate setting for ‘Head-Up Display brightness’ for key 1. (codable in HUD)
Head-Up Display brightness Key 2
• standard
• high
Increase the brightness of the Head-Up display. Separate setting for ‘Head-Up Display brightness’ for key 2. (codable in HUD)
Head-Up Display brightness Key 3
• standard
• high
Increase the brightness of the Head-Up display. Separate setting for ‘Head-Up Display brightness’ for key 3. (codable in HUD)
Head-Up Display brightness Key 4
• standard
• high
Increase the brightness of the Head-Up display. Separate setting for ‘Head-Up Display brightness’ for key 4. (codable in HUD)
**********************
Interior Lights
**********************
Interior lights with remote
• active
• not active
Pressing the lock button on the remote, when the car is already locked, turns on the interior lights. (codable in CAS)
**********************
Comfort Functions
**********************
Comfort start
• active
• not active
Ignition key just has to be tapped once to start the engine after ignition is turned on. (codable in CAS)
Comfort eject
• active
• not active
Turn off the ignition with a long press on the start/stop button in order to eject the ignition key. (codable in CAS)
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort close using remote
• active
• not active
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)
Comfort close – door (comfort access)
• active
• not active
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. (codable in CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)
Comfort close using keylocks
• active
• not active
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not
active’. This coding cannot be used to activate a retrofitted comfort
access. When the comfort access is deactivated, neither closing nor
opening the car via the door handle will work. Turning the ignition and
engine on/off without putting the key into the ignition (also known as
‘Keyless Go’) will also not work anymore. Therefore the car cannot be
stolen anymore by tricking the comfort access. In order to activate
comfort access again, please set this coding to ‘active’. (codable in
CAS)
**********************
Instrument Cluster
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (codable in KOMBI)
Digital speedometer correction
• true speed
• ‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by
the car. This has the effect that the shown speed is a bit higher than
the true speed of the car. (codable in KOMBI)
Correction’ analog speedometer
• true speed
• ‘corrected’ speed
This coding does not work on US models. Per default the speed shown in
the digital speedometer is ‘corrected’ by the car. This has the effect
that the shown speed is a bit higher than the true speed of the car.
(codable in KOMBI)
GPS time correction
• active
• not active
Time of day is corrected by using GPS. (codable in KOMBI)
Blank line in dashboard
• active
• not active
Blank line in dashboard is displayed/not displayed. (codable in KOMBI)
Permanent speedometer lighting
• active
• not active
Speedometer is always lit, even in the daytime. (codable in KOMBI)
Cruise Control speed display
• 0s
• 4s
• 6s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)
**********************
Air Conditioning
**********************
Save circulation settings
• active
• not active
Circulation settings are saved for next start of the vehicle. (codable in IHKA)
Air conditioning engine speed
• active
• not active
Increase idle engine speed when air conditioning is turned on. (codable in IHKA)
Blower level during automatic A/C
• active
• not active
The current blower level is displayed even during automatic mode of the air conditioning. (codable in IHKA)
Automatic compressor with air conditioning
• active
• not active
When pressing the ‘Automatic’ button for air conditioning, the
compressor for air conditioning does not start by itself. (codable in
IHKA)
Ventilation in off-mode
• active
• not active
Ventilation blows on smallest level, when air conditioning is in off-mode. (codable in IHKA)
Off-Mode Memory Key 1
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. Separate setting for key 1. (codable in IHKA)
Off-Mode Memory Key 2
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. Separate setting for key 2. (codable in IHKA)
Off-Mode Memory Key 3
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. Separate setting for key 3. (codable in IHKA)
Off-Mode Memory Key 4
• active
• not active
Save setting for ‘Off-mode’ for the air conditioning. Separate setting for key 4. (codable in IHKA)
**********************
Legal Disclaimer
**********************
Legal disclaimer (US)
• active
• not active
Show legal disclaimer when iDrive is started. (codable in CIC)
Camera disclaimer
• active
• active (6 seconds)
• not active
Show legal disclaimer for rear view camera. (codable in CIC)
Night Vision disclaimer
• active
• active (6 seconds)
• not active
Show legal disclaimer for night vision view camera. (codable in CIC)
**********************
High Beam Flasher
**********************
Flasher with bi-xenon
• active
• not active
Bi-xenon lamps are used for flasher. (codable in LMA)
Front fog lights with flasher
• active
• not active
Front fog lights are automatically turned off when activating flasher. (codable in LMA)
**********************
Opening
**********************
Comfort open using remote
• active
• not active
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)
Comfort open using keylocks
• active
• not active
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)
Deactivate comfort access
• active
• not active
In order to deactivate the comfort access, set this coding to ‘not
active’. This coding cannot be used to activate a retrofitted comfort
access. When the comfort access is deactivated, neither closing nor
opening the car via the door handle will work. Turning the ignition and
engine on/off without putting the key into the ignition (also known as
‘Keyless Go’) will also not work anymore. Therefore the car cannot be
stolen anymore by tricking the comfort access. In order to activate
comfort access again, please set this coding to ‘active’. (codable in
CAS)
Easy entry
• active
• not active
Press the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)
Easy entry Key 1
• active
• not active
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 2
• active
• not active
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 3
• active
• not active
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Easy entry Key 4
• active
• not active
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once
to unlock all doors. Press it again to lower the driver side window.
(codable in CAS)
Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)
Selective central locking Key 1
• active
• not active
“Separate setting for ‘Selective central locking’ for key 1
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 2
• active
• not active
“Separate setting for ‘Selective central locking’ for key 2
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 3
• active
• not active
“Separate setting for ‘Selective central locking’ for key 3
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking Key 4
• active
• not active
“Separate setting for ‘Selective central locking’ for key 4
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)”
Selective central locking – unlock fuel lid
• active
• not active
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (codable in CAS)
Unlock car when turned off
• active
• not active
Doors are automatically unlocked, when ignition key is ejected. Only
works if ‘Lock vehicle at x kph Key 1-4′ is activated. (codable in CAS)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. (codable in LMA)
Optical confirmation unlock vehicle Key 1
• active
• not active
Optical confirmation for unlocking vehicle is active/not active.
Separate setting for ‘Optical confirmation for unlocking’ for key 1.
(codable in LMA)
Optical confirmation unlock vehicle Key 2
• active
• not active
Optical confirmation for unlocking vehicle is active/not active.
Separate setting for ‘Optical confirmation for unlocking’ for key 2.
(codable in LMA)
Optical confirmation unlock vehicle Key 3
• active
• not active
Optical confirmation for unlocking vehicle is active/not active.
Separate setting for ‘Optical confirmation for unlocking’ for key 3.
(codable in LMA)
Audible confirmation – unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. Only
works if ‘Anti Theft
System’ is set to ‘active’. (codable in DWA)
Optical confirmation – unlocking vehicle
• active
• not active
Optical confirmation for unlocking vehicle is active/not active. Only
works if ‘Anti Theft System’ is set to ‘active’. (codable in DWA)
**********************
Park Distance Control(PDC)
**********************
PDC view
• vertical (F-Models)
• horizontal (E-Models)
Direction of park distance control view. (codable in CIC)
**********************
Parking Light
**********************
Comfort standing light
• active
• not active
If the light switch is set at automatic or on, the parking lights remain
on, until the vehicle is locked with the remote. (codable in LMA)
**********************
Mirrors
**********************
Mirror tilt 1/2
• active
• not active
Requirement for mirror tilt functions. (codable in KGM)
Mirror tilt 2/2
• active
• not active
Requirement for mirror tilt functions. (codable in KGM)
Comfort folding for sideview mirrors
• active
• not active
“This function requires an installed LIN-Bus (usually installed with mirror heating).
When holding the lock/unlock button on the remote the sideview mirrors
automatically fold/unfold. May need additional coding of the ‘CAS’
module. (codable in KGM)”
Tilt mirror in reverse
• active
• not active
“This function requires an installed LIN-Bus (usually installed with mirror heating).
Passenger mirror is tilted when switching into reverse gear. To activate
this function activate ‘Mirror tilt’, aswell. (codable in KGM)”
**********************
Voltage Monitoring
**********************
Angel Eyes voltage monit. 1/2
• active
• not active
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (codable in LMA)
Angel Eyes voltage monit. 2/2
• active
• not active
Deactivate with ‘Angel Eyes voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 1/2
• active
• not active
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in LMA)
Sidemarker voltage monit. 2/2
• active
• not active
Deactivate with ‘Sidemarker voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in LMA)
Turn signals front voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals front voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for fog lights. Might cause flickering of LED lights. (codable in LMA)
Fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Fog lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
High beams voltage monit. 1/2
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in LMA)
High beams voltage monit. 2/2
• active
• not active
Deactivate with ‘High beams voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Low beams voltage monit. 1/2
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in LMA)
Low beams voltage monit. 2/2
• active
• not active
Deactivate with ‘Low beams voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 1/2
• active
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in LMA)
Turn signals rear voltage monit. 2/2
• active
• not active
Deactivate with ‘Turn signals rear voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 1/2
• active
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in LMA)
Braking lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Braking lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 1/2
• active
• not active
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in LMA)
Third brake light voltage monit. 2/2
• active
• not active
Deactivate with ‘Third brake light voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 1/2
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in LMA)
Tail lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Tail lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 1/2
• active
• not active
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in LMA)
Reversing lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Reversing lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 1/2
• active
• not active
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in LMA)
License plate lighting voltage monit. 2/2
• active
• not active
Deactivate with ‘License plate lighting voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 1/2
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in LMA)
Rear fog lights voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog lights voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 1/2
• active
• not active
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light left voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light left voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 1/2
• active
• not active
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in LMA)
Rear fog light right voltage monit. 2/2
• active
• not active
Deactivate with ‘Rear fog light right voltage monit. 1/2′ to disable flickering of LED lights. (codable in LMA)
**********************
Speedometer
**********************
Digital speedometer
• active
• not active
Digital speedometer is displayed in dashboard. (codable in KOMBI)
Digital speedometer correction
• true speed
• ‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by
the car. This has the effect that the shown speed is a bit higher than
the true speed of the car. (codable in KOMBI)
Correction’ analog speedometer
• true speed
• ‘corrected’ speed
This coding does not work on US models. Per default the speed shown in
the digital speedometer is ‘corrected’ by the car. This has the effect
that the shown speed is a bit higher than the true speed of the car.
(codable in KOMBI)
**********************
Telephone
**********************
Telephone ringtone
• BMW
• Mini
Customize telephone ringtone. (codable in CIC)
**********************
Daytime Running Lights
**********************
Daytime running lights 1/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated
when the light switch is set to position ‘0’ in the car. Please activate
‘Daytime running lights 2/2′ as well. (codable in LMA)
Daytime running lights 2/2
• active
• not active
Daytime running lights (DRL) is active/not active. The DRL is activated
when the light switch is set to position ‘0’ in the car. Please activate
‘Daytime running lights 1/2′ as well. (codable in LMA)
Daytime running lights – Key 1
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 1. (codable in LMA)
Daytime running lights – Key 2
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 2. (codable in LMA)
Daytime running lights – Key 3
• active
• not active
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 3. (codable in LMA)
Daytime running lights customization
• not active
• dimmed turn signals
• dimmed high beams
Customization of the daytime running lights. Brightness can be set with ‘Daytime running lights brightness’. (codable in LMA)
Daytime running lights brightness
• low
• medium
• high
Brightness for dimmed daytime running lights. To use this function, also
activate ‘Daytime running lights customization’. (codable in LMA)
Daytime running lights – customization
• Off
• Low beams
• High beams
• Only additional lights (EU models)
• Only additional lights (US models)
Customization of the daytime running lights (DRL). The DRL is activated
when the light switch is set to position ‘0’ in the car. (codable in
LMA)
Daytime running lights – high beams brightness
• very low
• low
• medium
• high
Brightness of high beams for daytime running lights. To activate the
high beams for daytime running lights, set ‘Daytime running lights –
customization’ to ‘High beams’. (codable in LMA)
Daytime running lights – eyebrows
• active
• not active
Use eyebrows as daytime running lights. (codable in LMA)
Daytime running lights – front turn signals
• active
• not active
Use front turn signals as daytime running lights. To activate this
function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – turn signals brightness
• off
• low
• medium
• high
Brightness for ‘Daytime running lights – front turn signals’. (codable in LMA)
Daytime running lights – angel eyes
• active
• not active
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – angel eyes brightness
• off
• very low
• low
• medium
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. (codable in LMA)
Daytime running lights – angel eyes brightness (alternative)
• off
• very low
• low
• rather low
• rather high
• high
• very high
Brightness for ‘Daytime running lights – angel eyes’. Use this function,
if ‘Daytime running lights – angel eyes brightness’ does not show any
effect. (codable in LMA)
Daytime running lights – number plate lighting
• active
• not active
Use number plate lighting as daytime running lights. To activate this
function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – tail lights
• active
• not active
Use tail lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – outer brake lights
• active
• not active
Use outer brake lights as daytime running lights. To activate this
function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights – inner brake lights
• active
• not active
Use inner brake lights as daytime running lights. To activate this
function, set ‘Daytime running lights’ to ‘active’. (codable in LMA)
Daytime running lights
• standard
• permanently on
• permanently off
Set mode of daytime running lights. (codable in CIC)
**********************
Video in Motion
**********************
Video in motion 1/2
• active
• not active
Enable video and DVD while driving. In order to enable this option, activate ‘Video in motion 2/2′ as well. (codable in CIC)
Video in motion 2/2
• active
• not active
Only change this function with ‘Video in motion 1/2′. (codable in CIC)
**********************
Alarm System
**********************
Panic alarm with remote
• active
• not active
Press and hold the ‘unlock trunk’ button to trigger the alarm. To
activate this function, also activate ‘Panic alarm’ in the DWA module.
(codable in CAS)
Arm/Disarm Anti-Theft Alarm System
• Only with remote
• With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car
(1) with the locks and the remote or (2) only by locking/unlocking the
car with the remote. (codable in CAS)
Panic alarm
• active
• not active
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on
the remote. To activate this function also activate ‘Panic alarm with
remote’ in the CAS module. (codable in DWA)
Panic alarm 1/2
• active
• not active
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on
the remote. To activate this function also activate ‘Panic alarm with
remote’ in the CAS module and also ‘Panic alarm 2/2′ in the DWA.
(codable in DWA)
Panic alarm 2/2
• active
• not active
Only change this function with ‘Panic alarm 1/2′. (codable in DWA)
Alarm with dimmed headlights
• active
• not active
Dimmed headlights blink when alarm is initiated. (codable in DWA)
Alarm with warning lights
• active
• not active
Warning lights blink when alarm is initiated. (codable in DWA)
Alarm with high beams
• active
• not active
High beams blink when alarm is initiated. (codable in DWA)
Alarm type
• Europe
• USA
• UK
Type and sound of the alarm. United Kingdom is the same sound as Europe,
the duration of the alarm is eight times longer. (codable in DWAS)
**********************
Welcome Light
**********************
Welcome lights
• active
• not active
Welcome lights are turned on, when vehicle is unlocked. In order for the
welcome light to work, the light switch in the car has to be set to
‘Auto’. In some cases, this option also needs to be enabled in the
iDrive. In order to customize which lights should be turned on, please
use the following options. (codable in LMA)
Welcome lights Key 1
• active
• not active
Separate setting for ‘Welcome lights’ for key 1. (codable in LMA)
Welcome lights Key 2
• active
• not active
Separate setting for ‘Welcome lights’ for key 2. (codable in LMA)
Welcome lights Key 3
• active
• not active
Separate setting for ‘Welcome lights’ for key 3. (codable in LMA)
Welcome lights Key 4
• active
• not active
Separate setting for ‘Welcome lights’ for key 4. (codable in LMA)
Welcome lights duration
• off
• 5s
• 10s
• 20s
• 40s
• 90s
• 150s
• 240s
Duration of the welcome lights in seconds. (codable in LMA)
Welcome lights – low beams
• not active
• turn on softly
• turn on hard
Low beams are turned on with welcome lights. (codable in LMA)
Welcome lights – braking lights
• not active
• turn on softly
• turn on hard
Braking lights are turned on with welcome lights. (codable in LMA)
Welcome lights – turn signals front
• not active
• turn on softly
• turn on hard
Turn signals front are turned on with welcome lights. To activate this
function you may need to additionally code ‘Sidemarker (US) brightness’
to ‘very low’ or higher. (codable in LMA)
Welcome lights – turn signals rear
• not active
• turn on softly
• turn on hard
Turn signals rear are turned on with welcome lights. To activate this
function you may need to additionally code ‘Sidemarker (US) brightness’
to ‘very low’ or higher. (codable in LMA)
Welcome lights – high beams
• not active
• turn on softly
• turn on hard
High beams are turned on with welcome lights. (codable in LMA)
Welcome lights – number plate lighting
• not active
• turn on softly
• turn on hard
Number plate lights are turned on with welcome lights. (codable in LMA)
Welcome lights – front fog lights
• not active
• turn on softly
• turn on hard
Front fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – rear fog lights
• not active
• turn on softly
• turn on hard
Rear fog lights are turned on with welcome lights. (codable in LMA)
Welcome lights – angel eyes
• not active
• turn on softly
• turn on hard
Angel eyes are turned on with welcome lights. (codable in LMA)
Welcome lights – standing lights front
• not active
• turn on softly
• turn on hard
Standing lights front are turned on with welcome lights. (codable in LMA)
Welcome lights – standing lights rear
• not active
• turn on softly
• turn on hard
Standing lights rear are turned on with welcome lights. (codable in LMA)
Welcome lights – eyebrow lights
• not active
• turn on softly
• turn on hard
Eyebrow lights are turned on with welcome lights. (codable in LMA)
**********************
Warnings
**********************
Speed limit warning
• not active
• 120 kph / 75 mph
• 130 kph / 80 mph
• 140 kph / 85 mph
• 150 kph / 95 mph
• 170 kph / 105 mph
• 190 kph / 120 mph
• 210 kph / 130 mph
• 240 kph / 150 mph
Speed limit warning at 120 kph is active/not active. (codable in KOMBI)
Ignition key warning
• active
• not active
Ignition key warning active/not active. (codable in KOMBI)
Seat belt warning
• active
• not active
Various settings for the seat belt warning. (codable in KOMBI)
Seat belt reminder driver
• active
• not active
Seat belt reminder for driver is active/ inactive. (codable in KOMBI)
Seat belt reminder passenger
• active
• not active
Seat belt reminder for passenger is active/ inactive. (codable in KOMBI)
Threshold for low range warning
• off
• 20 km / 12 mi
• 50 km / 31 mi
Threshold for acoustic low range warning due to low fuel level. (codable in KOMBI)
Threshold for tank reserve warning
• 6.5 litres
• 8.0 litres
• 10.0 litres
• 12.5 litres
• 20.0 litres
Threshold for tank reserve warning due to low fuel level. (codable in KOMBI)
Lights-on warning
• active
• not active
A warning is shown, when the driver’s door is opened while the lights are still on. (codable in LMA)
Angel Eyes/standing lights warning
• active
• not active
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (codable in LMA)
Sidemarker warning
• active
• not active
Warning for malfunction of sidemarker in the on board computer. (codable in LMA)
Turn signals front warning
• active
• not active
Warning for malfunction of front turn signals in the on board computer. (codable in LMA)
Fog lights front warning
• active
• not active
Warning for malfunction of front fog lights in the on board computer. (codable in LMA)
High beams warning
• active
• not active
Warning for malfunction of high beams in the on board computer. (codable in LMA)
Low beams warning
• active
• not active
Warning for malfunction of low beams in the on board computer. (codable in LMA)
Turn signals rear warning
• active
• not active
Warning for malfunction of rear turn signals in the on board computer. (codable in LMA)
Outer brake lights warning
• active
• not active
Warning for malfunction of outer braking lights in the on board computer. (codable in LMA)
Third brake light warning
• active
• not active
Warning for malfunction of third brake light in the on board computer. (codable in LMA)
Tail lights warning
• active
• not active
Warning for malfunction of tail lights in the on board computer. (codable in LMA)
Reversing lights warning
• active
• not active
Warning for malfunction of reversing lights in the on board computer. (codable in LMA)
License plate light warning
• active
• not active
Warning for malfunction of license plate lights in the on board computer. (codable in LMA)
Rear fog light left warning
• active
• not active
Warning for malfunction of rear left fog light in the on board computer. (codable in LMA)
Rear fog light right warning
• active
• not active
Warning for malfunction of rear right fog light in the on board computer. (codable in LMA)
Eyebrow lights warning
• active
• not active
Warning for malfunction of eyebrow lights in the on board computer. (codable in LMA)
Seat belt warning
• active
• not active
Various settings for the seat belt warning. (codable in KOMBI)
Seat belt reminder driver
• active
• not active
Seat belt reminder for driver is active/ inactive. (codable in KOMBI)
Seat belt reminder passenger
• active
• not active
Seat belt reminder for passenger is active/ inactive. (codable in KOMBI)
**********************
Ignition
**********************
Prohibit engine start without brake
• active
• not active
Engine can’t be started when brake is not pressed. (codable in CAS)
**********************
**********************
で、リアがA333H
![[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]](https://hbb.afl.rakuten.co.jp/hgb/15bffb84.0bf82cf9.15bffb85.647e0e0f/?me_id=1248405&item_id=10393091&m=https%3A%2F%2Fthumbnail.image.rakuten.co.jp%2F%400_mall%2Fzenrin-ds%2Fcabinet%2Fbosch%2Faerotwin.jpg%3F_ex%3D80x80&pc=https%3A%2F%2Fthumbnail.image.rakuten.co.jp%2F%400_mall%2Fzenrin-ds%2Fcabinet%2Fbosch%2Faerotwin.jpg%3F_ex%3D128x128&s=128x128&t=picttext "[商品価格に関しましては、リンクが作成された時点と現時点で情報が変更されている場合がございます。]")
